How to connect Memobird to the Wi-Fi network

How to connect Memobird to the Wi-Fi network

Before you can connect Memobird to the Wi-Fi, here's what you need to do:

1. Successfully bind Memobird to your account. Here's how to bind Memobird

2. Make sure that your Wi-Fi network is 2.4Ghz, doesn't require an account login(e.g. in university, dormitory, etc), and doesn't contain any special characters. If you're not sure, here's how to check it and how to enable 2.4Ghz Wi-Fi

3. Make sure your phone's Wi-Fi, Bluetooth, and Location Service are enabled and your phone is connected to the Wi-Fi network.




    • Related Articles

    • Wi-Fi configuration stops and fails at Step 2: Connect to Memobird

      This issue happens on some Android devices with high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below. Turn off your phone's internet data, enable the Location Service(GPS), and connect to your Wi-Fi ...
    • Quick Start Guide

      Cloud Mode Step 1: Download the app & create a new account To download the latest app version called "Memobird" for Android and iOS, please scan the QR code below.      Or download it here Then, create a new Memobird account or sign in with your ...
    • How to enable 2.4Ghz band on my router?

      To make sure that Memobird will be compatible with your Wi-Fi, please configure your router first, and then enable the 2.4Ghz band. Below I will show you how to do that.   How to configure my router to be compatible with Memobird You need to log in ...
    • How to connect to a new Wi-Fi network after initial set up

      If you want to connect to a new Wi-Fi network, you just need to configure the Wi-Fi again.
    • How to bind Memobird

        If the QR code is not scanned, try to slowly move your phone closer and further from the code until it's successfully scanned. *Please be aware that one Memobird device can only be bound to one Memobird account. If more than one users bind to one ...