How to connect to a new Wi-Fi network after initial set up

How to connect to a new Wi-Fi network after initial set up

If you want to connect to a new Wi-Fi network, you just need to configure the Wi-Fi again.
    • Related Articles

    • How to connect Memobird to the Wi-Fi network

      Before you can connect Memobird to the Wi-Fi, here's what you need to do: 1. Successfully bind Memobird to your account. Here's how to bind Memobird 2. Make sure that your Wi-Fi network is 2.4Ghz, doesn't require an account login(e.g. in university, ...
    • How to enable 2.4Ghz band on my router?

      To make sure that Memobird will be compatible with your Wi-Fi, please configure your router first, and then enable the 2.4Ghz band. Below I will show you how to do that.   How to configure my router to be compatible with Memobird You need to log in ...
    • Wi-Fi configuration stops and fails at Step 2: Connect to Memobird

      This issue happens on some Android devices with high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below. Turn off your phone's internet data, enable the Location Service(GPS), and connect to your Wi-Fi ...
    • I have a 5G Wi-Fi network, how to make Memobird work?

      If you have a 5G Wi-Fi, please switch your phone to 2.4Ghz Wi-Fi because Memobird does not support 5G Wi-Fi. Please follow this guide to change your 5G Wi-Fi to 2.4Ghz Wi-Fi.
    • How to find out if my Wi-Fi is 2.4Ghz or 5Ghz?

      Please be aware that: Memobird can only be connected to the 2.4Ghz band on Wi-Fi routers or access points (AP). During the Wi-Fi configuration, both your smartphone and your Memobird need to connect to the 2.4Ghz band. All Wi-Fi routers have a 2.4Ghz ...