I have a 5G Wi-Fi network, how to make Memobird work?

I have a 5G Wi-Fi network, how to make Memobird work?

If you have a 5G Wi-Fi, please switch your phone to 2.4Ghz Wi-Fi because Memobird does not support 5G Wi-Fi.

Please follow this guide to change your 5G Wi-Fi to 2.4Ghz Wi-Fi.

    • Related Articles

    • How to connect Memobird to the Wi-Fi network

      Before you can connect Memobird to the Wi-Fi, here's what you need to do: 1. Successfully bind Memobird to your account. Here's how to bind Memobird 2. Make sure that your Wi-Fi network is 2.4Ghz, doesn't require an account login(e.g. in university, ...
    • How to enable 2.4Ghz band on my router?

      To make sure that Memobird will be compatible with your Wi-Fi, please configure your router first, and then enable the 2.4Ghz band. Below I will show you how to do that.   How to configure my router to be compatible with Memobird You need to log in ...
    • Wi-Fi configuration stops and fails at Step 2: Connect to Memobird

      This issue happens on some Android devices with high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below. Turn off your phone's internet data, enable the Location Service(GPS), and connect to your Wi-Fi ...
    • When I'm connecting Memobird to my Wi-Fi, it shows "Wi-Fi Null"

      "Wi-Fi null" indicates that your Wi-Fi network is not detected by Memobird app. To solve this, make sure you have completed all the check list below, and then try to configure your Memobird's Wi-Fi again. Make sure that your phone is connected to ...
    • How to connect to a new Wi-Fi network after initial set up

      If you want to connect to a new Wi-Fi network, you just need to configure the Wi-Fi again.