Memobird Device Introduction

Memobird Device Introduction

What you'll get

1 Memobird Device

1 Power Adaptor

1 Roll of Thermal Paper (inside Memobird device)

1 Quick Installation Guide

1 User Manual & Warranty Sheet

Screen_Shot_2017-05-11_at_12.35.37_PM.png

 

Device introduction

Picture1.png

Memobird Light Button


To add a device: press 2 times, then a QR code for adding the device will be printed out

To enter/cancel Wi-Fi configuration: press and hold for 6 seconds or more until a note is printed out

To print a diagnostic report: press 2 times, then the diagnostic report will be printed out

 

Light color indication

Solid green: Memobird is online(Cloud printing mode) and ready to be used

Slow-flashing green: Wi-Fi configuration mode

Fast-flashing green: Printing a note / connecting to a network

Blue: Memobird is in Local printing mode

Red: Out of paper / the printing head is overheated

Off: Power off / the light is turned off from Memobird App setting

 

 

Picture2.png

Memobird Toggle Switch

The switch on the bottom of Memobird is used to switch between Cloud Mode and Local Mode print mode. In Cloud Mode, you will be able to see the cloud icon. Cloud Mode requires Wi-Fi and the internet to print. Local Mode doesn’t require Wi-Fi or the internet to print. 


    • Related Articles

    • Memobird App Introduction

    • How to find out my device ID?

      Every Memobird device has its unique identifier called Device ID. This Device ID is different from Memobird ID that is used to add friends.   Here's how to find your Device ID.  If your device is bonded to your account   If your device is NOT bonded ...
    • How to use Memobird button?

      Press 1 time: To confirm that you have received an important message Press 2 times: To print a QR code for adding the device / print a diagnostic report Press and hold for 6 seconds: To enter/leave Wi-Fi configuration mode so that you can set up your ...
    • Device invalid when I scan the QR code to bind Memobird

      The reason why you cannot bind/add Memobird is that your device version and app version don't match. Different Memobird versions using different apps, for instance, Memobird G1 has to be used with its Chinese app version, it won't work if you use it ...
    • How to release Memobird from my account?

      1. Open Memobird device setup   2. Tap your Memobird device       3. Tap Release device