Wi-Fi configuration stops and fails at Step 3: Sending setup info to Memobird

Wi-Fi configuration stops and fails at Step 3: Sending setup info to Memobird

This issue happens on some Android devices with a high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below.
  1. Turn off your phone's internet data, enable the Location Service(GPS), and connect to your Wi-Fi network.
  2. If the process stops at step 2, please follow the next step. Otherwise, you can stop here and just wait until the process completes.
  3. Without exiting from the Memobird app, please go to your Wi-Fi setting.
  4. Manually connect to a Wi-Fi named “Memobird-xxxx”
  5. Switch back to Memobird app, and then the setup process will continue. Please wait until all the steps are completed.
  6. Go to your phone's Wi-Fi setting and connect to your Wi-Fi network again.

    • Related Articles

    • Wi-Fi configuration stops and fails at Step 2: Connect to Memobird

      This issue happens on some Android devices with high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below. Turn off your phone's internet data, enable the Location Service(GPS), and connect to your Wi-Fi ...
    • How to enable 2.4Ghz band on my router?

      To make sure that Memobird will be compatible with your Wi-Fi, please configure your router first, and then enable the 2.4Ghz band. Below I will show you how to do that.   How to configure my router to be compatible with Memobird You need to log in ...
    • My Memobird is blinking and I cannot print, how to fix this?

      When your Memobird is blinking green light that indicates that your Memobird is not connected to your Wi-Fi network. To make your Memobird online you need to re-configure the setup to restart the connection of your Memobird. Follow the following ...
    • How to use Memobird button?

      Press 1 time: To confirm that you have received an important message Press 2 times: To print a QR code for adding the device / print a diagnostic report Press and hold for 6 seconds: To enter/leave Wi-Fi configuration mode so that you can set up your ...
    • When I'm connecting Memobird to my Wi-Fi, it shows "Wi-Fi Null"

      "Wi-Fi null" indicates that your Wi-Fi network is not detected by Memobird app. To solve this, make sure you have completed all the check list below, and then try to configure your Memobird's Wi-Fi again. Make sure that your phone is connected to ...