Memobird North America Help Center

            Quick Start Guide

            Cloud Mode

            Step 1: Download the app & create a new account

            To download the latest app version called "Memobird" for Android and iOS, please scan the QR code below.

             Memobird_2D_barcode.png    Or download it here

            Then, create a new Memobird account or sign in to your Memobird account.

             

            Step 2: Power on Memobird in Cloud Mode

            Set Memobird to Cloud Mode by switching the toggle on the bottom of Memobird to Cloud Mode(you can see the blue cloud icon as shown below).

            Cloud_Mode_Toggle.png

            Power on your Memobird device, then the green light on the front button will be on.

             

            Step 3: Add/bind Memobird device to your account & connect Memobird to your Wi-Fi network

            Please be aware that Memobird does not support 5Ghz Wi-Fi and Wi-Fi network that requires account login. Therefore, please enable your 2.4Ghz Wi-Fi and then connect your phone to 2.4Ghz Wi-Fi. If you're not sure about your Wi-Fi band, here's how to find out if your Wi-Fi band is 5Ghz or 2.4 Ghz
            Before you start, please make sure you have enabled your phone's Location Service, Bluetooth, and your phone is connected to your Wi-Fi network


            If your phone doesn't show a QR scanner, go back to the Homepage and tap QR Scan.

            If the QR code is not scanned, try to slowly move your phone closer and further from the code until it's successfully scanned.

            *Please be aware that one Memobird device can only be bound to one Memobird account. If more than one users bind to one same device, the last user account who binds to Memobird would be the bounded account.




            Want to print without an internet connection? Complete the setup for Local Mode printing mode shown below.

            Local Mode

            You can only use this mode after you complete the first installation in Cloud Mode. In Local Mode, your phone won’t be able to connect to the internet.

            Step 1: Switch to Local Mode

            Toggle the switch under Memobird to Local Mode(you won't be able to see the cloud icon), then the light on the button will change color to blue, and Memobird Wi-Fi's name & password will be printed out.

            Picture2.png    IMG20180108201512.jpg

            Toggle Switch

            Step 2: Connect your phone to Memobird’s Wi-Fi

            Open your phone’s Wi-Fi setting, then connect to Memobird's Wi-Fi by entering the Memobird's Wi-Fi password.

            a.png  b.png  c.png

            That's it! If you want to come back to the Cloud Mode again, simply toggle the switch to Cloud Mode again, then the "Cloud mode" text will be printed out.

            IMG20180108201704.jpg


            Updated: 5 days ago
            Helpful?  
            Help us to make this article better
            19 46
            3 Comments